phone：0760 - 22387407
address：No. 4, Yihui Second Road, Henglan Town, Zhongshan City
Although the development speed of LED solar garden lights is not as fast as expected, it will replace traditional solar garden lights, which is beyond doubt. Many LED companies are competing to develop LED solar garden lights. Solar garden lights manufacturers have already launched LED solar garden lights, but most of them have not yet achieved mass production. Compared with the enthusiasm of the LED solar garden lamp company, the LED solar garden lamp market in China has not yet been launched in 2012. According to statistics, the market size of LED solar garden lights is only 200,000-300,000 baht. In the next few years, under the policy of slogans such as ten cities and thousands of miles, the Chinese LED street lamp market still maintains a relatively fast market development speed. It is estimated that by 2015, the market size will increase from 560 million yuan in 2012 to 3.96 billion yuan, with a compound annual growth rate of 63.0%.
For many people who buy solar garden lights wholesale, it is not professional installation of lamps, in fact, the installation of solar solar garden lights is actually a simple come.
1. The solar panel and the bracket can be effectively connected, and the connecting screw can effectively fix the solar panel, and the direction of the solar panel should be in the south direction.
2, the solar panel bracket and the pole connection should be flexible and easy to adjust.
3. The battery voltage block should be above 13V.
4. When the light source is connected to the battery, the lamp can be bright.
5, install the controller sequence:
(1) First connect the positive electrode of the solar panel, the positive electrode of the battery, and the positive pole of the light source to the red line of the controller. (positive to the positive)
(2) Connect the battery negative terminal to the controller green line, and the controller green light indicates that it can be discharged normally.
(3) Connect the negative pole of the lamp to the blue line of the controller, and the lamp will light up. (The light will not be connected for 1 minute during the day.)
(4) Connect the negative pole of the solar panel to the black line of the controller.
6. When the positive electrode of the battery is not connected properly, the negative electrode will hit the positive pole of the solar panel, which will cause the controller to short circuit and burn the circuit.
7. The aluminum-plastic tube of the battery is tightly connected with the waterproof outer shell. The base is 15-20 cm from the battery pit, and then bent 90 degrees or more to prevent rainwater from flowing in from the nozzle. The battery cylinder is laid flat, and the mark is upward to ensure the correct placement of the battery. .
Second, the construction of solar garden light foundation
First, dig a rectangular pit on the ground, and then place the embedded parts (ground bolts) in the dug pits, then put the wires into the solar battery and finally pour the cement.
Third, the installation of solar street light battery.
Connect the wires from the pole and place the battery in the battery compartment. Then make a pit, the bottom is silt (can seep), the top is cement. Finally put the battery in this pit. Then complete the solar solar garden light installation