phone：0760 - 22387407
address：No. 4, Yihui Second Road, Henglan Town, Zhongshan City
The garden light is a kind of outdoor lighting. The light source uses a new type of LED semiconductor as the illuminant. It usually refers to outdoor road lighting below 6 meters. Its main components are: LED light source, lamp, light pole and flange. The basic embedded part is composed of 5 parts. Because the garden lamp has the characteristics of versatility, aesthetics, landscaping and decorative environment, it is also called landscape garden lamp. LED has the characteristics of energy saving and high efficiency. It is mainly used for outdoor lighting in urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can prolong the time of people's outdoor activities and improve the safety of property.
LED lighting system: LED light source system includes: heat dissipation, light distribution, LED module.
Lamps: LED lighting system installed in the lamp. Cut the wire to make the wire, take 1.0mm? red, black copper core multi-strand wire, each cut 6 segments 40mm, peel ends 5mm at both ends, and dip the tin. Do the lamp board lead, take YC2X1.0mm? two core wire, cut a section of 700mm, peel the outer skin 60mm, brown wire stripping head 5mm, immersion tin; blue wire stripping head 5mm, immersion tin. The outer end peeled off the outer skin 80mm, the brown line peeled head 20mm; the blue line peeled head 20mm.
Light pole: The main materials of garden light pole are: equal-diameter steel pipe, opposite-shaped steel pipe, equal-diameter aluminum pipe, cast aluminum light pole, aluminum alloy light pole. Commonly used diameters are Φ60, Φ76, Φ89, Φ100, Φ114, Φ140, Φ165. According to the height and the place used, the thickness of the selected material is divided into: wall thickness 2.5, wall thickness 3.0, wall thickness 3.5. (The above is the regular size)
Flanges and basic embedded parts: Flanges are important components for installation of garden light poles and floors. Garden lamp installation method: Before installing the garden lamp, according to the standard flange size provided by the manufacturer, the garden lamp manufacturer uses M16 or M20 (common specification) screw to weld the base cage, and then excavate the appropriate size at the installation site. Potholes, the foundation cage is placed in it, after horizontal correction, cement concrete is used to fill the base cage, and after 3-7 days, the cement concrete is fully solidified, and the garden lamp can be installed. (Note: the pre-buried pipeline needs to be taken out when the garden light is poured.)
The garden lights have been developed into the 21st century and are widely used in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, plazas, private gardens, courtyard corridors and other public places. The safety of night travel is used to increase people's outdoor activities and improve the safety of life and property. It can also change people's moods, improve people's moods, and change people's perceptions. Garden lamp manufacturers create a light and dark palette-like night. During the day, the garden lights can be used to embellish the city landscape; at night, the courtyard lamps can provide the necessary lighting and living convenience, increase the sense of security of the residents, and highlight the highlights of the city and express the bright style.