太阳能庭院灯厂家

JW-TT16032

Your current location : Home >> Products >> Solar garden light

JW-TT16032

JW-TT160312019-08-30
JW-TT160332019-08-30
  • Classification:Solar garden light

  • Number of clicks:
  • Date of issue:2019/08/30
  • Inquiry
  • Product Overview
  • Performance
  • technical parameter

JW-TT16032 拷贝.jpg

1. Dig a depth of 1.5M, the square mouth frame is 0.8×0.8M foundation pit, put the four-corner foundation cage into the pit, the protruding part is about 0.1m above the ground (note that the thread part can not be damaged), and obliquely put into one A pipe with a diameter of 80 mm is filled with concrete into the foundation pit.




2. Dig a depth of about 0.8-1.0 m around the attachment about 0.2 m, and a 1.0 x 0.6 m battery trough foundation;




After 3.4-7 days of concrete solidification, prepare to erect the light pole; system connection system connection system connection system connection




4. The LED lamp is mounted on the lamp arm and connected to the main lamp post;




5. Start threading: connect 2.5mm2 wires (one red and one black) from the LED lamp through the arm and the light pole to the bottom of the pole; connect with the controller output;


6. Fix the fixture and then fix the pick arm;




7. Fixing the cross arm of the solar panel bracket on the main pole and fixing it with bolts;




8. Place the solar panel on the bracket frame, and then fix the solar panel to the bracket with screws; at the same time, take out the wires from the junction box of the panel, pass the panel bracket, and cross the arm into the main pole to reach the pole. unit.




9. The solar panel brackets are respectively fixed at both ends of the cross arm.




10. Put the battery into the battery box, the wire is threaded out of the wire hose, fix the bolt and wire hose, put the battery into the battery slot, and thread the wire hose into the 60-80MM pipe in the foundation. In the middle, the wire hose is higher than the ground and backfilled with soil.




11. Controller wiring: according to the order of battery, solar panel, load, respectively, connected to the corresponding position of the controller (note: first "-" and then "+", and prevent short circuit);




12. The wires on the battery of the garden lamp manufacturer are connected to the fan controller and the solar controller, respectively.




13. Remove the input line of the solar panel from the solar controller. After about 1 minute, the bulb can be turned on normally, indicating that the line is connected correctly; otherwise, the connection is incorrect and needs to be checked. Then put the controller into the light pole; erect the light pole, erect the light pole, erect the light pole, erect the light pole




14. Use a crane to pull up the pole so that the flange hole of the pole is aligned with the embedded part (note the direction of the fixture) and then fix it with screws;




15. The garden lamp manufacturer checks whether the light pole and the embedded bolt are fixed, whether the light is aligned with the road surface and neatly arranged, and whether the light pole of the whole road is neat, so that it is seen in a straight line from the first light pole.




16. Check if the controller cable is loose; then, cover the door panel and fix it.


Label

The website of this article:http://en.zsjwzm.com/product/998.html

Latest browse:

20190806153707_933.jpg  微信图片_20190904170048.jpg

 Please add me     WeChat public


Home               About               Product               Case               News               Contact

QQ:2934236014

email:2934236014@qq.com

phone:0760 - 22387407/18022028735

address:No. 4, Yihui Second Road, Henglan Town, Zhongshan City

Copyright © Zhongshan Juwei Lighting Technology Co., Ltd. 粤ICP备07503629号 Sitemap | RSS | XML